BMW ALPINA XD3

Powertrain

Superior engine power - unequalled efficiency

Utilising state-of-the-art engine technology the BMW ALPINA XD3 offers an unrivalled driving experience in this segment characterized by power, torque, dynamic handling and comfort. The BMW mild hybrid technology with a 48-volt starter generator delivers a noticeable performance boost especially in the lower speed ranges.

The straight-six 3.0 litre engine with bi-turbo charging delivers an output of 261 kW (355 hp). A maximum torque of 730 Nm (538 lb-ft) is available over a wide range from 1750 rpm to 2750 rpm for immediate power delivery in every driving situation. The straight-six 3.0 litre engine with bi-turbo charging delivers an output of 261 kW (355 hp). A maximum torque of 730 Nm (538 lb-ft) is available over a wide range from 1750 rpm to 2750 rpm for immediate power delivery in every driving situation.

» Technical Data

BMW mild hybrid technology

The mild hybrid technology adopted from BMW not only enhances the efficiency of the high-performance diesel engine but also its dynamic response. Recuperated energy is stored in a 48-volt battery and supplied as additional power by a belt-driven 48-volt starter generator. With electrical power of up to 8 kW (11 hp) instantly available, engine and throttle response are unparalleled, especially at low engine speeds. At constant speeds, the engine can operate in an optimised load range thanks to the support of the electrical system, further improving efficiency.

Information on fuel consumption and CO2 emissions according to the applicable EU Directive VO (EU) 715/2007:

BMW ALPINA XD3                                                                                                             
               
Fuel consumption, combined:                                                                                                    6.5 l/100 km              
CO2 emissions combined:                                                                                                         173 g/km                  
CO2 efficiency category:                                                                                                            B                      

The disclosed fuel consumption and CO2 emissions are measured according to WLTP (Worldwide Harmonized Light-Duty Vehicles Test Procedure) and converted to NEDC (New European Driving Cycle) for comparison purposes. Depending on your country, vehicle related taxes or other duties may be based on fuel consumption and CO2 emissions data which differs from that shown here.

Errors and changes excepted.

Further information on specific fuel consumption and specific CO2 emissions of new passenger cars is given in „Leitfaden über den Kraftstoffverbrauch, die CO2-Emissionen und den Stromverbrauch neuer Personenkraftwagen” which can be obtained free of charge at all points of sale and from the Deutsche Automobil Treuhand GmbH (DAT), Helmut-Hirth-Str. 1, 73760 Ostfildern-Scharnhausen.